> 低压电器 > 断路器附件 > FSB-1S-10A2P 免费发布信息

FSB-1S-10A2P

2019-03-25 编号:265825219
20
  • 卡式电表开关,FSB-1S,风神电器,FSB-1S-10A 2P
  • 卢棋
  • 򈍓򈍚򈍛򈍘򈍙򈍙򈍔򈍚򈍗򈍔򈍘

产品详情

产品名卡式电表开关,FSB-1S,FSB-1S-10A 2P,小型断路器
面向地区浙江温州乐清市
FSB-1S-10A2P FSB-1S卡式电表开关FSB-1S-10A 2P
适用范围Application
FSB-1S-10带分励脱扣器(卡式电表开关),具有分励脱扣功能,适用于交流50Hz或60Hz,额定工作电压为230/400V,额定电流至10A的线路中,对线路进行远跨度控制分断或自动信号控制分断,同时对线路起过载和短路保护的作用,也可以作为线路的不频繁操作转换之用。目前广泛应用于与IC卡预付费电度表配套使用来控制线路的通断,是IC卡预付费电度表配套使用的理想产品。
本产品符合GB10910.1-2005标准.
FSB 1s10milature crcuitbreakerwth shunt release(specal sichforcardtype meter)has funcionof sshunt tripping,is suitable for circuitries ofAC50Hz or60Hz,rated working voltage is 230/400V andratedcurrentup to 10A,it caries out far-span controlbreaking or automatic signal control breaking to thecircuitries,while protects the circuitries against overloador short-circuit,it alsocan be used for infrequentchangeover forcircuitries.At present,the productsare widely matched with IC card prepayment wathourmeters and used to control the making and breakingof arcuities,are ideal supporting products for ICcard prepayment watthour meters.
The products are in conformity with GB10910.1-2005,withintemationaladvanced level.
型号及其含义Code and implication
FS B – 1 S – 10A
│ │ │ │ └────壳架等级电流Shuell frame level current
│ │ │ └──────分励脱扣器shunt tripping device
│ │ └────设计序号Design seial number
│ └────小型断路器小型断路器Miniature Circuit Breaker
└─────────企业特征代号Enterprise symbol
注:FSB1S-10为控制信号断电延时脱扣。
主要规格:断路器按额定电流ln分:10A、20A、25A、32A、40A、50A、10A。
Note:FSB1S-10 is of control signal power failure timedelay tripping.
Main specifications:circuit breakers can be dividedaccording tothe rated current In:10A,20A,25A,32A,40A,50A,10A.
技术参数Technical parameters
断路器瞬时脱扣器的供货形式为C型,其他型式用户可很特殊订货;
断路器的短路分断能力10A、20A、25A、32A、40A,50A,10A为Im6000A;
断路器过电流保护特殊
Supplying goods of instantaneous release of circuitbreaker is Ctype,other types are available by makingspecial orders;
Short-circuit breaking capacity of circuit breaker of10A,20A,25A,32A and 40A,50A,10A is Im 6000A:
Over-curent protection characteristic of circuit breaker
功能特点Function characterstic
1.断路器具有一个过电流保护极和一个开闭中性极,并带有分励脱扣装置。
2.开闭中性极比过电流保护极先接通后分断;
3.额定分断能力高,可达6kA;
4.断路器操作机构为带储能式自由脱扣机构,触点快速闭合,克服了因人力操作手柄速度快慢带来的不利影响,大大提高了产品使
5.带指触防护组合型接触端子,安全性能高
6.分励脱扣器由可控硅、电磁脱扣器等组成驱动元件;
7.壳体和部件均采用国外进口的高阻燃、耐高温、耐冲击塑料制成。
The circuit breaker has an over-curent protection pole and an opening and closing
neutral pole,as well as shunt tripping device.
Opening and closing neutral pole wil make first and break later than theover-current
protection pole;
High rated breaking capacity,as high as 6kA;
Operating mechanism of the circuit breaker is a free trip mechanism with energy
storage function,the contact can close quickly,it overcomes the adverseeffectcaused by the handle speed variation of manual operation,improves the productsservice life greatly;during normal working,the contact can only rest on closing orbreaking position;
Combined type contact terminal with finger touch protection,high safety;
Drive element of shunt release is composed of thyristor,electromagnetic releaseand so on;
Boththeshellandcomponentsaremadeofimportedhighflameretardant,hightemperature resistant and impact resistant plastics.
工作原理Working principle
使用时通过信号输入端口给断路器智能分厉脱扣器极加上控制电压,即信号电压(可由远端控制线路提供),然后将断路器手柄推向闭合位置,通过操作机构带动动触头向静触头运行并与静触头可靠接触,并接通线路。当线路发生过载故障时,过载电流使热双金属元件弯曲,过载脱扣器动作,推动锁定机构复位,从而实现分断线路。当线路发生短路故障时,短路电流使瞬时脱扣器动作,推动锁定机构复位,实现分断线路。当因为某种需要,立即切断线路时,可能通过无线控制系统断开控制电压,此时信号电压检测电路得到信号后,对分励线圈输出电压信号,推动整个分励线圈动作,并同时带动锁定机构复位,实现分断功能。因此,该产品不同的线路状态下,均能达到分断的目的.
When using,apply controlvolage to theintellgentshuntrelease poleof crcutbreaker through signalinputport,ie.signal vollage (can be provided by remotecontrolcarcuit,then push he circut breakerhande towards closng posion,divehe moving contacto runtowards static contact and reliably contacing with throughparaimg mectansn.andputroughthe crcuit.When thecrcuthas overoad fautoveload curent would bend the bimetalic element,overoadrelease actsand pushestelockngmechanisn toreset o break he crcut Whenthedrcuthas shortcrautfasort-circuit curentwould make he nstantaneousrelease act,which pusheshelockmgmechanismtoreset.to break he arcuit When the crcuit mustbe cutofimmediately for some reason,the contrl vollage may be cut of by wireless controlsystem,atthis moment,the signalvolage detecion ciruit receivesthe signalandupulsvolagesigna to he shunt col,itdrves he whole suntcol to act andpushes the lockng mechanism toreset toreaize breaking funcion.Therefore.,thisproduct is able to realize breaking under diferent circuit states.
机械电气寿命
电气寿命:4000次,COSφ=0.85~0.9;
机械寿命:6000次。(其中5000次直接人力操作,操作频率In=25A为240次/小时),
In>25A为120次/小时;1000次由分励脱扣器控制分断,每次间隔时间≥3min)
应用示例
根据用户需要本公司可生产额定大电流100A的卡式电表开关。
The company also is able to product the rated max current at request Specialswitch of 100A for card type meter

乐清市风神电器有限公司提供FSB-1S-10A2P,包括卡式电表开关,FSB-1S,FSB-1S-10A 2P,小型断路器的详细产品价格、产品图片等产品介绍信息。

小提示:FSB-1S-10A2P为用户自行上传发布,其真实性、合法性由发布人负责。交易汇款需谨慎,请注意调查核实。

乐清市风神电器有限公司 5年

  • 自复式过欠压保护器,交流接触器,断路器,塑壳式断路器
  • 乐清市

——— 认证资质 ———

  • 身份证
    个人认证已通过
  • 营业执照
    企业认证已通过
  • 微信
    微信认证已通过
  • 手机
    手机认证已通过
  • 邮箱
    邮箱认证已通过