重庆渝北全自动挂历单/双线圈装订机厂家电话价格报价
全自动台历 挂历 笔记本单/双线圈装订机可能出现的异常、故障及排除方法 Trouble shooting
重庆市 江北区 渝北区 沙坪坝区 九龙坡区 万州区 永川市 南岸区 酉阳县 北碚区 涪陵区 秀山县 巴南区 渝中区 石柱县 忠县 合川市 大渡口区 开县 区 荣昌县 云阳县 梁平县 潼南县 江津市 彭水县 璧山县 綦江县 大足县 黔江区 巫溪县 巫山县 垫江县 丰都县 武隆县 万盛区 铜梁县 南川市 奉节县 双桥区 城口县
8.1 冲孔系统故障排除 Punching system trouble shooting
8.1.1 故障现象:全自动台历 挂历 笔记本单/双线圈装订机不动 Symptom: The machine does not move
产生原因:电源没有接通或者保护开关触发异常。
Cause: The power supply is not turned on or the protection switch is triggered
排除方法:查看电源开关是否已经接通,保护开关有无异常, 配电箱内空气开关是否断开。
Remedy: Check whether the power switch is switched on, whether the protection switch is abnormal or not, and the air switch in the distribution box is disconnected
8.1.2异常现象:全自动台历 挂历 笔记本单/双线圈装订机毛边大
Abnormal phenomenon: big hair
产生原因:纸张太厚,冲针严重磨损
Cause: The paper is too thick and the punch is severely worn
排除方法:正常运行纸张厚度建议在1-6mm之内;如果是冲针磨损严重请更换。Remedy: normal operation of the paper thickness is recommended within 1-6mm; if the pins wear, please replace.
8.2 机器手送料系统的故障排除 The feed belt system trouble shooting
8.2.1 故障现象:全自动台历 挂历 笔记本单/双线圈装订机不动Symptom: The machine does not move
产生原因:电源没有接通或者光电开关触发异常。Cause: The power supply is not turned on or the photoelectric switch triggers an abnormality
排除方法:查看电源开关是否已经接通,光电开关有无异常。Remedy: Check whether the power switch is turned on, the photoelectric switch is abnormal.
8.2.2 异常现象:全自动台历 挂历 笔记本单/双线圈装订机机械手抓取和送料位置不对 Abnormal phenomenon: the robot grab and feeding position is wrong
产生原因:皮带拉长松弛或者是皮带固定块1不牢靠。 Cause: The belt is stretched or the belt is fixed
排除方法:将皮带张紧到合适的松紧度,调整好机械手的位置锁紧皮带固定块。Remedy: Tighten the belt to the appropriate tightness, adjust the position of the robot to lock the belt fixed block.
长沙阿凡提智能装备有限公司提供重庆渝北全自动挂历单/双线圈装订机厂家电话价格报价,包括挂历YO圈装订机,台历胶圈装订机,记事本自动穿线机,挂历铁圈装订机的详细产品价格、产品图片等产品介绍信息。