吉米JM-8滑雪服厚料热风焊接机、热风缝口密封机、三层带贴条机
热风封口密封机 型号：JM-8
==产品特点==
1.选用7寸原装触摸屏，集成芯片，使本机动作更稳定，质量更可靠，所有动作参数都在液晶显示屏里，操作十分方便。
2.触摸屏的参数密码客户可以任意设定，从而防止员工修改参数。
3.集成芯片PZD自动跟踪温度，使温度更准确。
4.压轮传动采用步进电机，微退、送条更准确。
5.放带装置，对于PU、纯PU、三层带等由于复图或放置时间过长造成带与带之间过紧而起放松作用，而不至于带与带之间过紧在操作过程中扯长胶带。
6.上压轮气缸采用超薄可调节气缸，可对用户加工厚薄布料进行压力调节，防止压坏布料和压出布边有痕迹，解决了同类机器直压到底的缺陷。
7、发热枪供风选用自然高压风供及发热管之用，避免了常规用高压泵之气源的水分冲击发热内管，使之更加；而且配备了风速流量表，对风速流量数据一目了然，且可对风速流量大小任意调节，特别适合加工防水服装（如三夹带布料等）。
==技术参数==
型号 JM-8
电源 AC220V 50Hz
额定功率 2500W
温度控制 无段可调 常温～700℃
速度 1～22m/min 无段变速
压缩空气 0.35～0.5Mpa
压轮宽度 光面25mm标准型，其它如网纹，直纹等可自由选择
可吹胶带宽度 标准型14mm～22mm,其它宽度根据客户自由选择
上压轮升降距离 18mm～25mm
外型尺寸 长1300x宽550x高1650
净重 160kg
缝合跳漏防止: 在热风管与滚轮启动停止与热风管摆动之间均有可供利用调节以防止封口的跳漏
Model: JM-8
Features:
1.7 inch touch screen, TSI operating procedures, stepper motor ,digital display, setting parameters can be adjusted by your need.
2.Password of touch screen could be easily changed by your need, in order to prevent staffs modify the technical data.
3.The integrated chip PZD automatic tracking the temperature, its precision reaches ±1℃.
4.Roller drive controlled by stepper motor, micro send back with more accurate.
5. Tape-reel feeder can loosen the seam tape when the seam tape is very tight, to avoid the phenomenon of tape elongated in the operation process.
6.The thin cylinder of upper roller can be adjusted according to your thin & thick fabrics, in order to protect materials and solve the problems of sealing straight of seam kind seam sealing machine.
7. High pressure air blower supply the air to heater and quiet. If suddenly power off, it can protect heater and prolong the service life of heater.Equipped with wind flow, wind flow clear at a glance, can be arbitrary adjust the wind flow, especially suitable for high-grade fabric tape processing (such as 3-layer tape).
Technical parameter:
Model JM-8
Power AC220V 50Hz
Rated power 2500W
Temp control Up to 700℃
Speed 1～22m/min
Air compression 0.35～0.5Mpa
Width of roller Mill finish standard :25mm ,others can be choiced (ie:dictyonitic and ruled surface )
Adhesive tape width 14mm～22mm (standard) others can be choiced
Upper roller lift 18mm～25mm
Size (L×W×H) 1300x550x1650mm
Net weight 160kg
Sealing skip prevention There are adjustable devices to prevent the gun from jumping over the seamed sections when the gun is moving inward with the idle wheel starting,or when the gun moving outward with the idle wheel stopping.
江门市吉米焊接科技有限公司提供吉米JM-8滑雪服厚料热风焊接机、热风缝口密封机、三层带贴条机,包括热风焊接机,热风粘合机,过胶机,三层带粘合机的详细产品价格、产品图片等产品介绍信息。
